Prev | Index | Next

to give an idea of how the jack was affixed; thick CA was used to glue balsa to jack, and then some drops of 5 minute epoxy hold the balsa in to the foam
Copyright © 2003,

to give an idea of how the jack was affixed; thick CA was used to glue balsa to jack, and then some drops of 5 minute epoxy hold the balsa in to the foam

File: IMG_3237.JPG
File size: 1,127KB
Image Serial Number: 332-3237
Camera Model: Canon PowerShot G2
Firmware: Firmware Version 1.01
Date/Time: 2003:11:19 22:38:10
Shutter speed: 1/60 sec
Aperture: 4.0
Exposure mode: Av
Flash: Built-in
Flash EF guide number: 3.94
Flash exposure compensation: -1
Metering mode: Evaluative
Drive mode: Single frame shooting
ISO: 50
Lens: 7.0 to 21.0 mm
Focal length: 7.0mm
Subject distance: 0.267 m
Macro focus: On
AF mode: Single AF
Focus point: [Center]
Image size: 2272 x 1704
Rotation: none
Image quality: Superfine
White balance: Auto
Saturation: Normal
Sharpness: Normal
Contrast: Normal
User comments:
"to give an idea of how the jack was affixed; thick CA was used to glue balsa to jack, and then some drops of 5 minute epoxy hold the balsa in to the foam"